ATC

ATC SCM40A Active Floorstanding Speakers

€8,875.00

ATC is a specialist manufacturer of loudspeaker drive units and complete sound reproduction systems, including the relevant electronic equipment. Their principle in design and manufacture is to achieve levels of performance far in excess of the industry norm. This they do. Their passive and active range of speakers provide a superb level of detail for their price points and allow bring finesse to every system.

Manufactured in house to exacting tolerances, ATC’s drive units are legendary for their many design innovations. For example, all voice coils are edgewise wound ribbon, OFHC (oxygen free high conductivity), copper wire operating in a precision machined magnetic gap. The magnet assembly also has a hole through the pole allowing air to be vented from under the dust cap reducing air flow noise at low frequencies and at the same time increasing power handling and reliability. Coloration is minimized by ensuring that the diaphragm assembly and drive system are extremely well damped therefore eliminating unwanted resonances. 

The four passive and two active loudspeaker systems in the Entry Series employ ATC’s SH25-76 tweeter. Sharing technology with the renowned ATC Soft Dome midrange drive unit the tweeter employs a unique dual suspension system suppressing diaphragm rocking modes even at high output levels.

The ATC drive configuration of a short edgewise wound voice coil operating in a long magnetic gap ensures exceptionally low distortion throughout its operating band and removes the need for ferrofluids which can dry out over time and impair performance.

Built to give a lifetime of service and musical pleasure all ATC products carry a 6 year warranty. 

FEATURES

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

ATC Soft Dome mid-range driver.

ATC 164mm short coil bass driver.

All drive units incorporate massive optimised motor assemblies.

On-board grounded source 242 watt Class A/B Tri-amplifier.

Active crossover filters and overload protection.

6 year warranty.

SPECIFICATIONS

  • Drivers: HF ATC 25mm dual suspension Tweeter, Mid 75mm ATC Soft Dome, LF ATC 164mm SC

  • Matched Response: ±0.5dB
  • Frequency Response (-6dB): 48Hz-22kHz
  • Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
  • Max SPL: 112dB
  • Crossover Frequencies: 380Hz & 3.5kHz
  • Input Connector: Female XLR
  • Input sensitivity : 1V
  • Filters : 4th Order critically damped with phase compensation.
  • Overload Protection : Active FET momentary gain reduction.
  • Fault Protection : DC fault protection and thermal trip. Fault indication on rear panel mounted LED.
  • Amplifier Output: 150W LF, 60W MF, 32W HF
  • Cabinet Dimensions (HxWxD): 980 x 370 x 344mm (inc. foot plinth & amp, spikes add 25mm to height, grill adds 34mm to depth)
  • Weight: 36kg
Full Description

ATC is a specialist manufacturer of loudspeaker drive units and complete sound reproduction systems, including the relevant electronic equipment. Their principle in design and manufacture is to achieve levels of performance far in excess of the industry norm. This they do. Their passive and active range of speakers provide a superb level of detail for their price points and allow bring finesse to every system.

Manufactured in house to exacting tolerances, ATC’s drive units are legendary for their many design innovations. For example, all voice coils are edgewise wound ribbon, OFHC (oxygen free high conductivity), copper wire operating in a precision machined magnetic gap. The magnet assembly also has a hole through the pole allowing air to be vented from under the dust cap reducing air flow noise at low frequencies and at the same time increasing power handling and reliability. Coloration is minimized by ensuring that the diaphragm assembly and drive system are extremely well damped therefore eliminating unwanted resonances. 

The four passive and two active loudspeaker systems in the Entry Series employ ATC’s SH25-76 tweeter. Sharing technology with the renowned ATC Soft Dome midrange drive unit the tweeter employs a unique dual suspension system suppressing diaphragm rocking modes even at high output levels.

The ATC drive configuration of a short edgewise wound voice coil operating in a long magnetic gap ensures exceptionally low distortion throughout its operating band and removes the need for ferrofluids which can dry out over time and impair performance.

Built to give a lifetime of service and musical pleasure all ATC products carry a 6 year warranty. 

FEATURES

New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.

ATC Soft Dome mid-range driver.

ATC 164mm short coil bass driver.

All drive units incorporate massive optimised motor assemblies.

On-board grounded source 242 watt Class A/B Tri-amplifier.

Active crossover filters and overload protection.

6 year warranty.

SPECIFICATIONS

  • Drivers: HF ATC 25mm dual suspension Tweeter, Mid 75mm ATC Soft Dome, LF ATC 164mm SC

  • Matched Response: ±0.5dB
  • Frequency Response (-6dB): 48Hz-22kHz
  • Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
  • Max SPL: 112dB
  • Crossover Frequencies: 380Hz & 3.5kHz
  • Input Connector: Female XLR
  • Input sensitivity : 1V
  • Filters : 4th Order critically damped with phase compensation.
  • Overload Protection : Active FET momentary gain reduction.
  • Fault Protection : DC fault protection and thermal trip. Fault indication on rear panel mounted LED.
  • Amplifier Output: 150W LF, 60W MF, 32W HF
  • Cabinet Dimensions (HxWxD): 980 x 370 x 344mm (inc. foot plinth & amp, spikes add 25mm to height, grill adds 34mm to depth)
  • Weight: 36kg
Current Stock:
Shipping Cost: Calculated at Checkout
SKU: ATC-ATCSCM40A-CHERRY

Customer Reviews Write a Review

Sorry, there are no reviews for this product yet.