Final

Final D8000 Planar Magnetic Headphones ex Display

€3,349.00 €1,495.00 (You save €1,854.00)

The D8000 Planar Magnetic headphones are an experience of detail, openness and volume.

The D8000 provide the sound quality expected of high end planar magnetic headphones with the volume and open feel bass of dynamic models. 

With conventional planar magnetic headphones low bass frequencies are difficult to replicate, to make up for this the D8000s’ earpads have been tightly sealed, the front section of the diaphragm has been enclosed, whilst the new AFDS (Air Film Damping System) solves the problem of the diaphragm coming into contact with magnets allowing the extension of the D8000 low frequency range. 

To reproduce subtle high frequencies, the diaphragm must be of a lightweight design. Compared with other dynamic models of the same diameter, the D8000s' diaphragm is 1/3 lighter. A super thin aluminium coil has been etched onto the extremely lightweight film diaphragm, and as such, the adhesion essential for use between the coil and the diaphragm of dynamic models - which has a very negative effect on sound quality - is not necessary. 

For the Future

So as to make future upgrades and repairs possible, almost every part has been designed in such a way that they can be disassembled, ensuring that the product can be used for many years.

A machined aluminium magnesium alloy housing

To establish AFDS, an extremely high level of precision compared to typical driver units is necessary. Because of this, the machined aluminium magnesium alloy housing has been machined with great precision. By applying the kind of leather coating finish used with high-quality cameras, Final have also taken measures against minute vibrations.

In house manufacturing

The D8000 model is manufactured in-house in Kawasaki. Together with the precision of individual parts, the precision involved in the assembly process depends on the precision of the tools known as jigs that assist in the assembly process. So as to be able to fine-tune even the slightest of irregularities in jig precision during the assembly process, Final design and manufacture production jigs and measurement jigs themselves.

Newly-developed detachable cable

Final have developed a new cable for the D8000. Two kinds of cable are included – a 3.5mm mini plug type (1.5m) and a 6.3mm standard plug type (3m). 

Newly-developed headphone stand

The headphone stand for the D8000 is the first such stand created by final. While compact, it is made entirely of machined aluminium. It is a stand for exclusive long-term use with the D8000.

Specifications

  • Housing: Aluminum magnesium alloy
  • Driver: AFDS Planer Magnetic
  • Sensitivity: 98dB/mW
  • Impedance: 60Ω
  • Weight: 523g
  • Cord length: 1.5/3m
Full Description

The D8000 Planar Magnetic headphones are an experience of detail, openness and volume.

The D8000 provide the sound quality expected of high end planar magnetic headphones with the volume and open feel bass of dynamic models. 

With conventional planar magnetic headphones low bass frequencies are difficult to replicate, to make up for this the D8000s’ earpads have been tightly sealed, the front section of the diaphragm has been enclosed, whilst the new AFDS (Air Film Damping System) solves the problem of the diaphragm coming into contact with magnets allowing the extension of the D8000 low frequency range. 

To reproduce subtle high frequencies, the diaphragm must be of a lightweight design. Compared with other dynamic models of the same diameter, the D8000s' diaphragm is 1/3 lighter. A super thin aluminium coil has been etched onto the extremely lightweight film diaphragm, and as such, the adhesion essential for use between the coil and the diaphragm of dynamic models - which has a very negative effect on sound quality - is not necessary. 

For the Future

So as to make future upgrades and repairs possible, almost every part has been designed in such a way that they can be disassembled, ensuring that the product can be used for many years.

A machined aluminium magnesium alloy housing

To establish AFDS, an extremely high level of precision compared to typical driver units is necessary. Because of this, the machined aluminium magnesium alloy housing has been machined with great precision. By applying the kind of leather coating finish used with high-quality cameras, Final have also taken measures against minute vibrations.

In house manufacturing

The D8000 model is manufactured in-house in Kawasaki. Together with the precision of individual parts, the precision involved in the assembly process depends on the precision of the tools known as jigs that assist in the assembly process. So as to be able to fine-tune even the slightest of irregularities in jig precision during the assembly process, Final design and manufacture production jigs and measurement jigs themselves.

Newly-developed detachable cable

Final have developed a new cable for the D8000. Two kinds of cable are included – a 3.5mm mini plug type (1.5m) and a 6.3mm standard plug type (3m). 

Newly-developed headphone stand

The headphone stand for the D8000 is the first such stand created by final. While compact, it is made entirely of machined aluminium. It is a stand for exclusive long-term use with the D8000.

Specifications

  • Housing: Aluminum magnesium alloy
  • Driver: AFDS Planer Magnetic
  • Sensitivity: 98dB/mW
  • Impedance: 60Ω
  • Weight: 523g
  • Cord length: 1.5/3m
Current Stock:
Shipping Cost: Calculated at Checkout

Customer Reviews Write a Review

Sorry, there are no reviews for this product yet.