Dynavector DRT XV-1t Cartridge

Dynavector
€6,949.00
Current Stock:
Adding to cart… The item has been added

The DRT XV-1t is ground breaking design utilising 8 magnets in a V formation. Designed around a source of very pure iron that founder Dr Tominari had access to. The armature uses this rare and highly costly material. It is wound with incredibly fine wire to give high agility and precision allied to a very stable output. The hardened bamboo casework is precision machined to house the inner mechanism- it has a significant effect on sound quality. Wonderful.

Specifications

  • Type: Low output moving coil cartridge with multi Alnico magnets and the Flux damper
  • Output Voltage: 0.35mV (at 1KHz, 5cm/sec.)
  • Channel Separation: 30 dB (at 1KHz)
  • Type: Low output moving coil cartridge with multi Alnico magnets and the Flux damper
  • Output Voltage: 0.35mV (at 1KHz, 5cm/sec.)
  • Channel Separation: 30 dB (at 1KHz)
  • Channel balance: 1.0 dB (at 1KHz)
  • Frequency response: 20 - 20,000Hz (± 1dB)
  • Compliance: 10 x 10-6 cm/dyn
  • Tracking force: 1.8 - 2.2 grams
  • Impedance: R=24 ohms
  • Recommended load resistance: > 75 ohms
  • Cantilever: 6mm length 0.3 mm dia. solid boron with a special armature
  • Stylus tip: PF Line contact shape, stylus radius: 7 x 30 micron
  • Weight: 12.0 grams