Dynaudio

Dynaudio Xeo 30 Wireless Speaker System

€3,599.00

The new Xeo 30 brings a new look, new technology, new tuning and a new level of wireless hi-fi performance.

Xeo 30: upgraded DSP and new tuning

Behind the new black grille you’ll find a 28mm Esotec soft-dome tweeter and twin 14cm Esotec MSP woofers. They use the same celebrated Dynaudio technology: lightweight aluminium voice-coils, innovative magnet systems, proprietary diaphragm materials and more. Each driver’s performance has been brought totally up to date with its own individually tuned, individually optimised 65W amplifier.

Cutting-edge DSP (digital signal processing) ensures the amplifiers perform at their best. 

The new Xeo 30’s updated firmware improves compressor and limiter performance for improved dynamics, along with a simplified 2.5-way crossover. It’s also widened the overlap between the tweeter and woofers’ frequency ranges for incredible integration from high to low, as well as giving improved bass and off-axis performance.

Simplifying the crossover also gives the DSP engine a chance to rev-up more on speaker-position compensation for improvements in free-standing, against-the-wall and in-the-corner placements. The bass-port design further enhances low-frequency performance too, for even greater weight and punch.

The Xeo 30’s master speaker now has direct inputs. There’s 24-bit/192kHz-compatible Toslink digital optical for hi-res sources, as well as stereo RCA phono and 3.5mm minijack inputs for myriad other sources. And, of course, you can stream in wireless 24/96 hi-res from the optional Dynaudio Connect box, which gives you even more input options.

Want to go full wireless from your smartphone or other Bluetooth device? There’s built-in high-quality aptX Bluetooth on board for total convenience. The two speakers (both of which can be set to either left or right channels depending on how you want to set them up) communicate with each other using a 24-bit/96kHz signal, so you can be sure you’re hearing the smallest of details in your music without having to fret about which cables and interconnects to buy.

SPECIFICATIONS

  • Analogue inputs: Mini-jack, RCA stereo
  • Digital inputs: Toslink
  • Wireless: 24-bit / 96kHz
  • Frequency response (±3dB): 36Hz – 21kHz
  • Box principle: Bass reflex
  • Crossover: 2.5-way DSP-based
  • Crossover frequencies: 200/4300Hz
  • Woofer: 2 x 14cm MSP
  • Tweeter: 28mm soft dome
  • Amplifier power: 3 x 65W
  • AC power input: 100V – 240V, 50/60Hz
  • Standby power consumption: <0.5W
  • Maximum power consumption: 165W
  • Weight: 13.4kg / 29.5lbs
  • Dimensions (W x H x D): 180 x 824 x 246mm
  • Dimensions with feet/grille (W x H x D): 228 x 852 x 275mm
Full Description

The new Xeo 30 brings a new look, new technology, new tuning and a new level of wireless hi-fi performance.

Xeo 30: upgraded DSP and new tuning

Behind the new black grille you’ll find a 28mm Esotec soft-dome tweeter and twin 14cm Esotec MSP woofers. They use the same celebrated Dynaudio technology: lightweight aluminium voice-coils, innovative magnet systems, proprietary diaphragm materials and more. Each driver’s performance has been brought totally up to date with its own individually tuned, individually optimised 65W amplifier.

Cutting-edge DSP (digital signal processing) ensures the amplifiers perform at their best. 

The new Xeo 30’s updated firmware improves compressor and limiter performance for improved dynamics, along with a simplified 2.5-way crossover. It’s also widened the overlap between the tweeter and woofers’ frequency ranges for incredible integration from high to low, as well as giving improved bass and off-axis performance.

Simplifying the crossover also gives the DSP engine a chance to rev-up more on speaker-position compensation for improvements in free-standing, against-the-wall and in-the-corner placements. The bass-port design further enhances low-frequency performance too, for even greater weight and punch.

The Xeo 30’s master speaker now has direct inputs. There’s 24-bit/192kHz-compatible Toslink digital optical for hi-res sources, as well as stereo RCA phono and 3.5mm minijack inputs for myriad other sources. And, of course, you can stream in wireless 24/96 hi-res from the optional Dynaudio Connect box, which gives you even more input options.

Want to go full wireless from your smartphone or other Bluetooth device? There’s built-in high-quality aptX Bluetooth on board for total convenience. The two speakers (both of which can be set to either left or right channels depending on how you want to set them up) communicate with each other using a 24-bit/96kHz signal, so you can be sure you’re hearing the smallest of details in your music without having to fret about which cables and interconnects to buy.

SPECIFICATIONS

  • Analogue inputs: Mini-jack, RCA stereo
  • Digital inputs: Toslink
  • Wireless: 24-bit / 96kHz
  • Frequency response (±3dB): 36Hz – 21kHz
  • Box principle: Bass reflex
  • Crossover: 2.5-way DSP-based
  • Crossover frequencies: 200/4300Hz
  • Woofer: 2 x 14cm MSP
  • Tweeter: 28mm soft dome
  • Amplifier power: 3 x 65W
  • AC power input: 100V – 240V, 50/60Hz
  • Standby power consumption: <0.5W
  • Maximum power consumption: 165W
  • Weight: 13.4kg / 29.5lbs
  • Dimensions (W x H x D): 180 x 824 x 246mm
  • Dimensions with feet/grille (W x H x D): 228 x 852 x 275mm
Current Stock:
Shipping Cost: Calculated at Checkout

Customer Reviews Write a Review

Sorry, there are no reviews for this product yet.