Dynaudio

Dynaudio Xeo 10 Wireless Speaker System

€1,499.00

The all-new Xeo 10 wireless active hi-fi speaker proves that ‘versatility’ needn’t mean ‘compromise’.

Put it on a shelf. On your desk. On stands. Wherever and however you use it, you’re guaranteed all the performance you’d expect from 45 years of audio expertise.

Xeo 10 updates and improves the outgoing Xeo 2 model with new components, new tunings and new finishes. Make no mistake, this is far more than just a new look.

Features

The new Xeo 10 comes with a smooth, sleek design. The driver is mounted to the baffle from behind – meaning no more visible screws, and given the solid aluminium front baffle a new brushed finish. The Xeo 10 is available in Black Satin (with a black baffle and grille) or White Satin (with a grey baffle and grille) finishes.

Inside the super-rigid composite cabinet you’ll find a new, optimised 14cm MSP woofer and one of Dynaudio's signature 28mm soft-dome tweeters (a technology they’ve been using since the very beginning, and which has appeared in every single high-end speaker they’ve ever produced).

And since this is an active speaker, each driver has its own dedicated 65W digital amplifier. That not only means each amp is fine-tuned specifically for the driver it’s powering, it means even greater control over the speaker’s overall performance.

The Xeo 10 has an updated tuning with improved limiter algorithms for better high-volume performance, as well as a higher theoretical crossover point – which means the tweeter can reach deeper in its frequency range for a bigger overlap with the woofer’s upper limit. This means a far smoother balance between bass and treble, and also improved off-axis performance.

The Xeo 10 come with direct inputs, touch-sensitive volume controls, and position-sensitive controls (tell the speakers if they’re in free space, against a wall or in a corner and they’ll adjust their performance accordingly). That’s not to mention true hi-res 24-bit/96kHz performance and compatibility with the optional Dynaudio Connect box (which gives you even more inputs, DLNA, multi-room audio and more).

And to top it off, it’s specifically designed to work with the optional Dynaudio desk stand and dedicated wall-mount, as well as Vesa 100 mountings, for massive flexibility in placement.

SPECIFICATIONS

  • Analogue inputs: Mini-jack, RCA stereo
  • Digital inputs: Toslink
  • Wireless: 24-bit / 96kHz
  • Frequency response (±3dB): 40Hz – 21kHz
  • Box principle: Bass reflex
  • Crossover: 2-way DSP-based
  • Crossover frequencies: 5000Hz
  • Woofer: 14cm MSP
  • Tweeter: 28mm soft dome
  • Amplifier power: 2 x 65W
  • AC power input: 100V – 240V, 50/60Hz
  • Standby power consumption: <0.5W
  • Maximum power consumption: 100W
  • Weight: 4kg / 8.8lbs
  • Dimensions (W x H x D): 173 x 255 x 154mm
  • Dimensions with feet/grille (W x H x D): 173 x 255 x 164mm
Full Description

The all-new Xeo 10 wireless active hi-fi speaker proves that ‘versatility’ needn’t mean ‘compromise’.

Put it on a shelf. On your desk. On stands. Wherever and however you use it, you’re guaranteed all the performance you’d expect from 45 years of audio expertise.

Xeo 10 updates and improves the outgoing Xeo 2 model with new components, new tunings and new finishes. Make no mistake, this is far more than just a new look.

Features

The new Xeo 10 comes with a smooth, sleek design. The driver is mounted to the baffle from behind – meaning no more visible screws, and given the solid aluminium front baffle a new brushed finish. The Xeo 10 is available in Black Satin (with a black baffle and grille) or White Satin (with a grey baffle and grille) finishes.

Inside the super-rigid composite cabinet you’ll find a new, optimised 14cm MSP woofer and one of Dynaudio's signature 28mm soft-dome tweeters (a technology they’ve been using since the very beginning, and which has appeared in every single high-end speaker they’ve ever produced).

And since this is an active speaker, each driver has its own dedicated 65W digital amplifier. That not only means each amp is fine-tuned specifically for the driver it’s powering, it means even greater control over the speaker’s overall performance.

The Xeo 10 has an updated tuning with improved limiter algorithms for better high-volume performance, as well as a higher theoretical crossover point – which means the tweeter can reach deeper in its frequency range for a bigger overlap with the woofer’s upper limit. This means a far smoother balance between bass and treble, and also improved off-axis performance.

The Xeo 10 come with direct inputs, touch-sensitive volume controls, and position-sensitive controls (tell the speakers if they’re in free space, against a wall or in a corner and they’ll adjust their performance accordingly). That’s not to mention true hi-res 24-bit/96kHz performance and compatibility with the optional Dynaudio Connect box (which gives you even more inputs, DLNA, multi-room audio and more).

And to top it off, it’s specifically designed to work with the optional Dynaudio desk stand and dedicated wall-mount, as well as Vesa 100 mountings, for massive flexibility in placement.

SPECIFICATIONS

  • Analogue inputs: Mini-jack, RCA stereo
  • Digital inputs: Toslink
  • Wireless: 24-bit / 96kHz
  • Frequency response (±3dB): 40Hz – 21kHz
  • Box principle: Bass reflex
  • Crossover: 2-way DSP-based
  • Crossover frequencies: 5000Hz
  • Woofer: 14cm MSP
  • Tweeter: 28mm soft dome
  • Amplifier power: 2 x 65W
  • AC power input: 100V – 240V, 50/60Hz
  • Standby power consumption: <0.5W
  • Maximum power consumption: 100W
  • Weight: 4kg / 8.8lbs
  • Dimensions (W x H x D): 173 x 255 x 154mm
  • Dimensions with feet/grille (W x H x D): 173 x 255 x 164mm
Current Stock:
Shipping Cost: Calculated at Checkout

Customer Reviews Write a Review

Sorry, there are no reviews for this product yet.