Dynaudio

Dynaudio LYD 7 Black Studio Monitor

€495.00

A 7in personal reference monitor, designed from the ground-up to bring supreme precision to your mixes. This monitor uses sophisticated DSP to extend or its curtail low-frequency response by 10Hz, while Position and Sound Balance controls let you fine-tune for total neutrality in your environment. Its larger 7in woofer helps extend bass, while the low-mass aluminium voice-coil, vented ferrite magnet and MSP driver take care of precision. 

The woofer and the tweeter are powered by a dedicated state-of-the-art Class D amplifier, delivering 50W / 50W of power per monitor. The amp features a 96kHz/24bit signal path and selectable input sensitivity, as well as the same Standby Mode as the original LYD speakers.

Also, like the other LYD monitors, the LYD 7 features Bass Extension, allowing for a choice between the default setting or pushing towards maximum bass or maximum volume. Changes will affect the low-end response, but importantly the linear frequency response remains intact.

The Sound Balance option is basically a tilt filter that tips the tonal balance gently. In short, it emphasizes one end of the spectrum while decreasing the opposite end by the same amount. This approach is different from typical shelving filters, as it alters the frequency response, but without interfering with the phase. By default the monitor is set flat, but the Sound Balance toggle switch can go for either ‘Bright’ or ‘Dark’.

Featuring handmade driver units from the factory in Denmark, all LYD 7 monitors are assembled, finalized and tested before leaving Dynaudio’s warehouse. 

SPECIFICATIONS

Speaker

  • Max SPL (1m, pair): 109dB
  • Principle: Bass reflex
  • Crossover Frequencies: 4.3kHz
  • Tweeter: 1in soft dome
  • Midrange: N/A
  • Woofer: 7in
  • Dimensions (W x H x D): 186 x 320 x 296mm
  • Weight: 8kg
  • Sensitivity (85dB @ 1m, free field): +6dB: 50mV, 0dB: 100 mV, -6dB: 200 mV

Amplifier

  • Power (Tweeter/Woofer): 50W/50W
  • Type: Class D
  • Power consumption standby: <0.5W
  • Power consumption max.:  100W
  • Input voltage: 90 - 264V AC, 50 - 60Hz
  • Inputs: XLR balanced/RCA unbalanced
  • Outputs: N/A
  • Frequency response:45 - 21kHz

NB: Price is per Monitor

Full Description

A 7in personal reference monitor, designed from the ground-up to bring supreme precision to your mixes. This monitor uses sophisticated DSP to extend or its curtail low-frequency response by 10Hz, while Position and Sound Balance controls let you fine-tune for total neutrality in your environment. Its larger 7in woofer helps extend bass, while the low-mass aluminium voice-coil, vented ferrite magnet and MSP driver take care of precision. 

The woofer and the tweeter are powered by a dedicated state-of-the-art Class D amplifier, delivering 50W / 50W of power per monitor. The amp features a 96kHz/24bit signal path and selectable input sensitivity, as well as the same Standby Mode as the original LYD speakers.

Also, like the other LYD monitors, the LYD 7 features Bass Extension, allowing for a choice between the default setting or pushing towards maximum bass or maximum volume. Changes will affect the low-end response, but importantly the linear frequency response remains intact.

The Sound Balance option is basically a tilt filter that tips the tonal balance gently. In short, it emphasizes one end of the spectrum while decreasing the opposite end by the same amount. This approach is different from typical shelving filters, as it alters the frequency response, but without interfering with the phase. By default the monitor is set flat, but the Sound Balance toggle switch can go for either ‘Bright’ or ‘Dark’.

Featuring handmade driver units from the factory in Denmark, all LYD 7 monitors are assembled, finalized and tested before leaving Dynaudio’s warehouse. 

SPECIFICATIONS

Speaker

  • Max SPL (1m, pair): 109dB
  • Principle: Bass reflex
  • Crossover Frequencies: 4.3kHz
  • Tweeter: 1in soft dome
  • Midrange: N/A
  • Woofer: 7in
  • Dimensions (W x H x D): 186 x 320 x 296mm
  • Weight: 8kg
  • Sensitivity (85dB @ 1m, free field): +6dB: 50mV, 0dB: 100 mV, -6dB: 200 mV

Amplifier

  • Power (Tweeter/Woofer): 50W/50W
  • Type: Class D
  • Power consumption standby: <0.5W
  • Power consumption max.:  100W
  • Input voltage: 90 - 264V AC, 50 - 60Hz
  • Inputs: XLR balanced/RCA unbalanced
  • Outputs: N/A
  • Frequency response:45 - 21kHz

NB: Price is per Monitor

Current Stock:
Shipping Cost: Calculated at Checkout
SKU: DYNAUDIO-LYD7B

Customer Reviews Write a Review

Sorry, there are no reviews for this product yet.