Dynaudio

Dynaudio Contour 20 Walnut ex Display

€4,500.00 €2,700.00 (You save €1,800.00)
These ex Display Dynaudio Contour 20 are finished in Walnut. A stunning pair of Standmount speakers.
 
The new Contour 20 standmount speaker is a continuation of Dynaudio's speaker technology. 
 
The Contour uses the ultra-pure, ultra-clear Esotar2 fabric soft-dome tweeter. It’s Dynaudio’s finest tweeter and commonly regarded as one of the world’s best-ever drivers. The Brand-new one-piece extended-excursion 18cm woofer is powered by a lightweight aluminium voice-coil and a vented dual-ferrite magnet system. You won’t find them on any other speaker. It’s made from MSP – a material developed by Dynaudio. MSP gives exactly the right combination of stiffness and damping – which you’ll hear as exactly the right combination of power, nesse and control. Just what a Contour speaker should have. 
 
Dynaudio have redesigned the entire crossover, using ultra high-quality Mundorf capacitors and a brand-new wiring configuration for even better bass. The baffle is aluminium, and set into the cabinet. Its chamfer is included in the driver’s basket – which not only looks well, but also reduces unwanted high- frequency diffraction effects for clearer treble, and provides a solid foundation for the drivers to do their work. A solid foundation means improved high-volume performance at low frequencies, too. 
 
Pure, honest, compact. This is Contour 20.
 
Specifications  
  • Sensitivity: 86dB (2.83V/ 1m)
  • IEC power handling: 180 Watts
  • Nominal impedance: 4 ohms
  • Frequency response: 39Hz – 23kHz (±3dB)
  • Box principle: Rear ported bass reflex
  • Crossover: 2 way
  • Crossover frequency: 2200 Hz
  • Crossover slope: 2nd order
  • Woofer: 18cm MSP cone
  • Tweeter :28mm soft dome
  • Weight: 15.5 kg
  • Dimensions (W x H x D): 215 x 440 x 360mm

 

Full Description
These ex Display Dynaudio Contour 20 are finished in Walnut. A stunning pair of Standmount speakers.
 
The new Contour 20 standmount speaker is a continuation of Dynaudio's speaker technology. 
 
The Contour uses the ultra-pure, ultra-clear Esotar2 fabric soft-dome tweeter. It’s Dynaudio’s finest tweeter and commonly regarded as one of the world’s best-ever drivers. The Brand-new one-piece extended-excursion 18cm woofer is powered by a lightweight aluminium voice-coil and a vented dual-ferrite magnet system. You won’t find them on any other speaker. It’s made from MSP – a material developed by Dynaudio. MSP gives exactly the right combination of stiffness and damping – which you’ll hear as exactly the right combination of power, nesse and control. Just what a Contour speaker should have. 
 
Dynaudio have redesigned the entire crossover, using ultra high-quality Mundorf capacitors and a brand-new wiring configuration for even better bass. The baffle is aluminium, and set into the cabinet. Its chamfer is included in the driver’s basket – which not only looks well, but also reduces unwanted high- frequency diffraction effects for clearer treble, and provides a solid foundation for the drivers to do their work. A solid foundation means improved high-volume performance at low frequencies, too. 
 
Pure, honest, compact. This is Contour 20.
 
Specifications  
  • Sensitivity: 86dB (2.83V/ 1m)
  • IEC power handling: 180 Watts
  • Nominal impedance: 4 ohms
  • Frequency response: 39Hz – 23kHz (±3dB)
  • Box principle: Rear ported bass reflex
  • Crossover: 2 way
  • Crossover frequency: 2200 Hz
  • Crossover slope: 2nd order
  • Woofer: 18cm MSP cone
  • Tweeter :28mm soft dome
  • Weight: 15.5 kg
  • Dimensions (W x H x D): 215 x 440 x 360mm

 

Current Stock:
Shipping Cost: Calculated at Checkout

Customer Reviews Write a Review

Sorry, there are no reviews for this product yet.