Dynaudio

Dynaudio BM6A Studio Monitor

€840.00

The BM 6A features an electronic 4th order phase-aligned crossover with a crossover point at 2.2kHz, which feeds two high performance discrete MOSFET amplifiers rated at 100W each.

The low frequency section is driven by a low frequency equalizer offering a choice between extended, critical damped response or more conventional higher Qt response for more level but less low frequency output. Included in the electronics is a complex protection circuit, which helps to prevent accidental damage to the drivers, yet still providing maximum transient response.

The BM 6A is housed with an elegant matte cabinet with radius edged construction on the front baffle to reduce boundary effects and improve overall sound quality.

Technical Specifications
  • System:2-way Active Nearfield Monitor
  • Frequency Response:41Hz - 21kHz
  • Max SPL 1m, pair (IEC Long Term):118dB RMS
  • Max SPL 2m, 5.1 (IEC Long Term):119,5dB RMS
  • Input level for 85 dB SPL @ 1m (+4/-10):-12dBu RMS / -28 dBu RMS
  • Input level for max peak SPL (+4/-10):+16dBu peak / -1dBu peak
  • Power consumption:Idle: 25W / Max: 200W
  • Amplifier power:Tweeter: 100W / Woofer: 100W
  • Resonance Frequency:49Hz
  • Internal Cabinet Volume:9.5 liters
  • Principle:Bass reflex
  • Crossover Frequencies:2200Hz
  • Crossover Slope:24dB/oct
  • Tweeter:Esotec 28mm soft dome, rear chamber, Magnetic fluid. 4 mm die-cast alu front
  • Woofer:17cm, 75mm pure alu wire voice coil, One piece moulded polypropylene cone
  • Weight:11kg
  • Dimensions (WxHxL):217 x 338 x 321mm

NB: Price is per Monitor

Full Description

The BM 6A features an electronic 4th order phase-aligned crossover with a crossover point at 2.2kHz, which feeds two high performance discrete MOSFET amplifiers rated at 100W each.

The low frequency section is driven by a low frequency equalizer offering a choice between extended, critical damped response or more conventional higher Qt response for more level but less low frequency output. Included in the electronics is a complex protection circuit, which helps to prevent accidental damage to the drivers, yet still providing maximum transient response.

The BM 6A is housed with an elegant matte cabinet with radius edged construction on the front baffle to reduce boundary effects and improve overall sound quality.

Technical Specifications
  • System:2-way Active Nearfield Monitor
  • Frequency Response:41Hz - 21kHz
  • Max SPL 1m, pair (IEC Long Term):118dB RMS
  • Max SPL 2m, 5.1 (IEC Long Term):119,5dB RMS
  • Input level for 85 dB SPL @ 1m (+4/-10):-12dBu RMS / -28 dBu RMS
  • Input level for max peak SPL (+4/-10):+16dBu peak / -1dBu peak
  • Power consumption:Idle: 25W / Max: 200W
  • Amplifier power:Tweeter: 100W / Woofer: 100W
  • Resonance Frequency:49Hz
  • Internal Cabinet Volume:9.5 liters
  • Principle:Bass reflex
  • Crossover Frequencies:2200Hz
  • Crossover Slope:24dB/oct
  • Tweeter:Esotec 28mm soft dome, rear chamber, Magnetic fluid. 4 mm die-cast alu front
  • Woofer:17cm, 75mm pure alu wire voice coil, One piece moulded polypropylene cone
  • Weight:11kg
  • Dimensions (WxHxL):217 x 338 x 321mm

NB: Price is per Monitor

Current Stock:
Shipping Cost: Calculated at Checkout

Customer Reviews Write a Review

Sorry, there are no reviews for this product yet.